English 
Estonian Remote Io System
- Discrete Output
- Discrete Input
- Analog Input
- Analog Output
- Special Module
- Power Module
- Back
Warning: Attempt to read property "slug" on bool in /data02/virt118176/domeenid/www.odotautomation.ee/htdocs/wp-content/plugins/royal-elementor-addons/modules/woo-grid/widgets/wpr-woo-grid.php on line 9559
Warning: Attempt to read property "parent" on bool in /data02/virt118176/domeenid/www.odotautomation.ee/htdocs/wp-content/plugins/royal-elementor-addons/modules/woo-grid/widgets/wpr-woo-grid.php on line 9562
Warning: Attempt to read property "parent" on bool in /data02/virt118176/domeenid/www.odotautomation.ee/htdocs/wp-content/plugins/royal-elementor-addons/modules/woo-grid/widgets/wpr-woo-grid.php on line 9576
Warning: Attempt to read property "slug" on bool in /data02/virt118176/domeenid/www.odotautomation.ee/htdocs/wp-content/plugins/royal-elementor-addons/modules/woo-grid/widgets/wpr-woo-grid.php on line 9614
Module features ◆The module supports 8 channels voltage signal output ◆ Output range： 0~5VDC, 0~10VDC, ±5VDC, ±10VDC， 16 bits ◆ The module carries with 8 analog output LED indicators ◆ Module output signal is single – ended common – grounded output
◆ The module supports two channels of encoder input. ◆ Each encoder channel supports A/B incremental encoder or pulse-directional encoder input.| ◆ Each encoder channel supports orthogonal A/B differential signal input, voltage output range 0-5V. ◆ The incremental encoder mode supports x1/ x2 / x4 frequency multiplication mode. ◆ The pulse – direction mode supports nondirectional signal, pulse input only. ◆ Each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc. ◆ Each encoder channel supports 1 digital output signal with an output voltage of 5Vdc. ◆ The module internal bus and field input…
CT-124H: 32 channels digital input, sink or source, 34Pin male connector, 24Vdc, counting function supported (counting frequency up to 200Hz) ◆ the module supports 32 channels digital input, it supports sink input and the input high level is valid as it could support PNP sensor; it also supports source input and the input low level is valid as it could support NPN sensor. ◆ the module could collect the digital output signal of field equipment (dry contact or active output). ◆ the module could be connected to 2-wire or 3-wire digital sensor. ◆ the internal bus of the module and field…
CT-1218: 8 channels digital input/24VDC/PNP ◆the module supports 8 channels digital input, supports sink input，and the input voltage is 24VDC and the input high level is valid. It could support PNP sensor. ◆the module could collect digital output signal of field equipment (dry contact or active output). ◆the module could be accessed to 2-wire or 3-wire digital sensor. ◆the internal bus and field input of the module use opto-isolator. ◆the module supports the input signal holding function, and the holding time can be set. ◆the module carries 8 digigtal input channels with LED indicator on each channel. ◆supports counting function,…
CT-222H: 32 channels digital output, source, 24Vdc/0.5A，34Pin male connector ◆ the module supports 32 channels digital output; the output voltage is 24VDC and the output high level is valid. ◆ module can drive field equipment. (relay, solenoid valve, etc.) ◆ the internal bus of the module and field output are using opto-coupler. ◆ the module carries 32 digital output channel LED indicator light. ◆ the module has the functions of thermal shutdown and overcurrent protection. ◆ the module supports short circuit protection and overload protection.
CT-1228: 8 channels digital input/24VDC/NPN ◆ the module supports 8 channels digital input, and the input low level is valid. It could support NPN sensor. ◆ the module could collect digital output signal of field equipment (dry contact or active output). ◆ the module could be accessed to 2-wire or 3-wire digital sensor. ◆ the internal bus and field input of the module use opto-isolator. ◆ the module supports the input signal holding function, and the holding time can be set. ◆ the module carries 8 digigtal input channels with LED indicator on each channel. ◆ supports counting function after…
Module features ◆ the module supports 8-channel digital output, output high level effective, and output voltage 24V ◆ the module could drive field equipment (relay, solenoid valve, etc.) ◆ the module internal bus and field output are isolated by optocoupler ◆ the module carries with 8 digital output channel LED indicator ◆ the module has the functions of thermal shutdown and overcurrent protection ◆ the module supports short circuit protection and overload protection
CT-2224: 4 channel digital output/24VDC/ Source type ◆the module supports 4-channel digital output, the output voltage is 24VDC and the output high level is valid. ◆the max output current of DO single channel is 3.3 A. ◆the module could drive field equipment (relay, solenoid valve, etc.) ◆the module internal bus and field output are isolated by optocoupler ◆the module carries with 4 digital output channel LED indicator ◆the module has the functions of thermal shutdown and overcurrent protection ◆the module supports short circuit protection and overload protection
IO Config V1.0.0.6(Fully with .NET4.0.rar|CT-2718.pdf CT-2718: 8 channel relay output 2A/30VDC/60W Module features ◆ 8-channel relay normally on output ◆ 8 LED channel indicators ◆ Low on resistance (≤100mΩ) ◆ 250VAC/220VDC the max. switch voltage is 250VAC/220VDC
CT-3804: 4 channels Analog Input, Thermocouple(J type, K type, E type, T type, Stype, R type, B type, N type) Module features ◆ The module supports 4-channel thermocouple signal acquisition ◆ The module carries with 4 analog indicators ◆ The module supports 9 kinds of conventional thermocouple temperature measurement type ◆ The internal bus of the module and field input adopts magnetic isolation ◆ The module input channel supports TVS overvoltage protection ◆ 24-bit ADC resolution (Σ-δ type)